User manual

NANO-GX User Manual
Page 74
Figure 4-9: RS-422/485 Serial Port Select Jumper Pinout Location
4.4 Chassis Installation
WARNING:
Airflow is critical to the cooling of the CPU and other onboard
components. The chassis in which the NANO-GX must have air vents
to allow cool air to move into the system and hot air to move out.
The NANO-GX must be installed in a chassis with ventilation holes on the sides allowing
airflow to travel through the heat sink surface. In a system with an individual power supply
unit, the cooling fan of a power supply can also help generate airflow through the board
surface.
4.4.1 NANO-GX Installation
To install the NANO-GX motherboard into the chassis please refer to the reference
material that came with the chassis.
4.5 Internal Peripheral Device Connections
The cables listed in Table 4-9 are shipped with the NANO-GX.