User manual

NANO-GX User Manual
Page 67
Description Label Type
AT/ATX Power Mode Select JP2
2-pin header
COM1/2 Port RI and Voltage
Select (Optional)
JP6
10-pin header
CRT/LCD Mode Select JP3
3-pin header
LCD Panel (LVDS/TTL) Voltage
select
JP7
3-pin header
LCD Panel Shift Clock Setting JP5
3-pin header
PC104 Plus VIO Voltage select
jumper & SERIRQ Select
JP1
6-pin header
RS422/RS485 Select JP4
3-pin header
Table 4-1: Jumpers
4.3.1 AT/ATX Power Mode Select
Jumper Label: JP2
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-2
Jumper Location:
See
Figure 4-3
The AT Power Mode Select jumper specifies the systems power mode as AT or ATX. AT
Power Select jumper settings are shown in
Table 4-2.
JP2 Description
Short Use AT power Default
Open Use ATX power
Table 4-2: AT Power Mode Select Jumper Settings
The location of the AT Power Select jumper is shown in Figure 4-3 below.