User manual

NANO-GX User Manual
Page 108
 Serial Port 6 Use IRQ [IRQ10]
Use the Serial Port 6 Use IRQ option to select the interrupt address for serial port 6.

IRQ5
Serial port 5 IRQ address is IRQ5

IRQ7
Serial port 5 IRQ address is IRQ7

IRQ10
Serial port 5 IRQ address is IRQ10

IRQ11
D
EFAULT Serial port 5 IRQ address is IRQ11
5.5.1 IT8888 ISA Decode IO
NOTE:
Five PCI-104 devices can be stacked onto the NANO-GX motherboard. If
these devices are stacked onto the board, the ISA bus space should be
enabled. If no PCI-104 devices are being used, disable all the buses. Disabling
these buses frees up system resources that can be allocated to other system
applications.
Use the IT8888 ISA Decode IO menu (BIOS Menu 8) to set the IO memory range for the
onboard ISA.