User manual

NANO-GX User Manual
Page 102
 Drive PIO Mode [Auto]
Use the Drive PIO Mode options below to select the Programmed Input/Output (PIO)
mode for the following HDDs:
 Master Drive PIO Mode
 Slave Drive PIO Mode

Auto
(D
EFAULT) The computer selects the correct mode.

Mode 0
PIO mode 0 selected with a maximum transfer rate of 3.3MBps.

Mode 1
PIO mode 1 selected with a maximum transfer rate of
5.2MBps.

Mode 2
PIO mode 2 selected with a maximum transfer rate of
8.3MBps.

Mode 3
PIO mode 3 selected with a maximum transfer rate of
11.1MBps.

Mode 4
PIO mode 4 selected with a maximum transfer rate of
16.6MBps.
 IDE UDMA [Auto]
Use the IDE UDMA option below to select the Ultra DMA (UDMA) mode for the following
HDDs:
 IDE Primary Master UDMA
 IDE Primary Slave UDMA

Auto
(D
EFAULT) The computer selects the correct UDMA.

Disabled
The UDMA for the HDD device is disabled.
 IT8888 ISA Decode IO [Press Enter]
Use the IDE ISA Decode IO option to open the IT8888 ISA Decode I/O menu. The IT8888
ISA Decode I/O options are shown in Section
5.5.1.