Specifications

MODEL 160P STACKER – Quick Reference Guide 3
CHAPTER 2: FEATURES AND SPECIFICATIONS
The Model 160P and Model 466P Stacking system is design with many features that are
unique when compared to other systems. The 160P Stacker is built to meet the demands of
high throughput applications and rigorous use. The large capacity of the stacker reduces user
intervention to a minimum, allowing the stacking system to be unattended for long periods of
time.
2.1 SPECIAL FEATURES
 3-belt configuration for accurate stacking
 Adjustable Stacker Full Sensor - Adjusts from 1.5" high stack (~200 .007" tags) to 9"
high stack (~1250 .007" tags).
 Stacker Jam Sensor – The Model 160P Stacker will generate an error condition when
the stacker does not see a tag within two print cycles at the beginning of a batch.
Stacker also generates an error condition if there is no gap (sensor blocked
continuously) between any two tags.
 Removable Stack Cartridge
 Magnetic Stack Rider Weight - The weight will lock into place temporarily while the user
is removing cartridge. This feature allows for one hand cartridge removal.
 Positive Stacker to Printer Engagement hooks to ensure both units remain locked
during operation
2.2 STACKING PERFORMANCE
 Stacks at 5" per second
 High Throughput – prints and stacks approximately 90 1.91" long tags in one minute
 Stacks up to 1000, .007" thick tags
2.3 INTERFACE COMMUNICATIONS
 9-pin female D-Sub connector. Connection for Model 466P Stacker Interface Cable
ONLY.