Specifications

MODEL 160P STACKER – Quick Reference Guide 1
CHAPTER 1: INTRODUCTION
The Model 160P is a Stacker designed to work in conjunction with the Model 466P Direct
Thermal printer. The 160P Stacker will stack up to 1000, .007" thick tags without user
intervention.
The Model 160 "P" version is an application specific product derived from the standard Model
160 Stacker. The 160P was designed specifically to stack 3.34" wide by 1.91" long tags
generated from the Model 466P thermal printer.
The Model 466 "P" version is also an application specific product that was derived from the
standard Model 466 Direct Thermal or Thermal Transfer printer. The 466P was designed
specifically to print on 3.34" wide continuous rolled direct thermal media.
The Model 466P thermal printer has complete control over the stacking process. The 466P
will monitor all stacker error conditions that are generated during the print process. The Model
160P Stacker will generate an error when the stacker is full and also in the unlikely event of a
media jam that might occur between the printer’s cutter and the stacker.