Specifications

Model 466P Front Panel Operation Chapter 5
14 MODEL 160P STACKER – Quick Reference Guide
5.1.2 TOF/ERROR CLEAR BUTTON
The “TOF/Error clear” button performs three functions.
1.) If the Model 466P is in an idle state and no errors are pending, tapping the
TOF/Error clear button will perform a “find Top of Form” procedure. This is the
normal process after the Media has been loaded or reset for some reason.
2.) The TOF/Error clear button is also used to clear all Error Conditions if possible. The
Model 466P will attempt to clear the error and if it is successful, the printing
operation will continue from where it left off. If the printer is unsuccessful, it will
continue to stay in an error condition until the user has resolved the pending
problem.
3.) The TOF/Error clear button can be used to resume from a “>PRINTER PAUSED<”
condition.
NOTE: SEE CHAPTER 6 “TROUBLESHOOTING GUIDE” FOR FURTHER DETAILS
ON THE VARIOUS ERROR CONDITIONS.
5.1.3 INACTIVE BUTTON
The “Inactive” button has been disabled to simplify the functionality of the Model 466P
Front Panel.
5.2 STATUS LIGHT DEFINITIONS
5.2.1 POWER STATUS LIGHT (GREEN)
The “Power” status light will be illuminated GREEN whenever there is power applied to
the printer.
5.2.2 ERROR STATUS LIGHT (RED)
The “Error” status light will be illuminated RED whenever there is an error pending and
requires user intervention. The Model 466P is also equipped with a Piezo that will
report a fast repeating tone whenever an error is pending. The “>PRINTER PAUSED<”
condition will not illuminate the status light, but will report a slow repeating tone with the
Piezo.
5.2.3 ON LINE STATUS LIGHT (YELLOW)
The “On line” status light will always be illuminated YELLOW when power is applied.