Specifications

MODEL 160P STACKER – Quick Reference Guide 13
CHAPTER 5: MODEL 466P FRONT PANEL OPERATION
5.1 BUTTON FUNCTIONALITY
5.1.1 PAUSE/RESUME BUTTON
The “Pause/Resume” button has two basic functions.
1.) If you press and hold the button during printing, the printer will pause and send a
message to the host “>PRINTER PAUSED<”. To recover from a paused condition,
simply tap the Pause/Resume button and the printer continues from where it left off.
2.) The Pause/Resume button can also be used to recover from a “>STACKER
ERROR< “ condition. This can only occur if the print head on the Model 466P has
not been lifted during this error condition. If the print head is lifted during a
“>STACKER ERROR<” condition, it is assumed that the media has been adjusted,
and a “find Top of Form” procedure must take place before the printer continues
operation. In this case, the user must then tap the “TOF/Error Clear” button to
continue.
This extra functionality was added to this button because most often a >STACKER
ERROR< does not require the user to lift the print head. The >STACKER ERROR<
problem typically occurs either in the stacker (full condition) or between the stacker’s
pinch point and the cutter on the Model 466P.
Pause/Resume
Inactive
TOF/Error Clear
Power
Error
On Line