Specifications

Chapter 4 Model 466P – Basic Operation
MODEL 160P STACKER – Quick Reference Guide 11
4.3.6 STACKER ENGAGEMENT BRACKET
The Stacker Engagement Bracket consists of three pins to lock the printer and stacker
together. For further details on engagement procedures, see CHAPTER 3 section 3.3
“ENGAGEMENT PROCEDURE”.
4.3.7 INTERNAL MEDIA GUIDE
The Internal Media guide aligns the media to the left edge of the Model 466P.
CAUTION: THIS GUIDE MUST BE DOWN DURING OPERATION. FAILURE TO DO
SO WILL PRODUCE UNDESIRABLE PRINTING RESULTS AND POSSIBLE MEDIA
JAMS.
4.3.8 MEDIA SUPPLY SHAFT
The Media Supply Shaft provides a location for the Continuous Direct Thermal Media
Roll.
4.3.9 RMG – REMOVABLE MEDIA GUIDE
The Removable Media Guide has been provided to assist in the unlikely event of a
“Paper Jam”. This guide can be removed without tools to clear the media path between
the cutter and print head on the printer.
CAUTION: DO NOT OPERATE THE MODEL 466P WITHOUT THE REMOVABLE
MEDIA GUIDE INSTALLED. FAILURE TO DO SO WILL PRODUCE UNDESIRABLE
PRINTING RESULTS AND POSSIBLE MEDIA JAMS.