Specifications

Chapter 3 Model 160P Stacker – Basic Operation
MODEL 160P STACKER – Quick Reference Guide 7
3.2.5 SLIDING STACK WEIGHT
The Sliding Stack Weight is used to apply a moderate amount of pressure to the top of
the media being stacked. This weight will assist in maintaining a uniform stack.
To ease cartridge removal, raise the sliding stack weight to the top of the stacker. The
weight will be magnetically held in the top most position. Lower the Sliding Stack
Weight once the cartridge has been reinstalled.
CAUTION: DO NOT OPERATE STACKER WITH SLIDING STACK WEIGHT IN THE
RAISED OR LOCKED POSITION.
3.2.6 STACKER JAM SENSOR
The Stacker Jam Sensor is used to detect two different types of stacking problems.
1.) The sensor will generate an error and stop the printing process if it does not sense
or “see” the media within two print cycles.
2.) The sensor will generate an error and stop the printing process if it does not sense
or “see” a gap between each tag.
SEE CHAPTER 6 “TROUBLESHOOTING GUIDE” FOR FURTHER INFORMATION ON
RESOLVING STACKER ERRORS.
3.2.7 PINCH ROLLER
The Pinch Roller is an integral part of the stacker used to grip the tag as it is being cut,
and then advances the tag into the stack.
Sliding Stack Weight in
Magnetically Held Position
Sliding Stack Weight in Normal
Operating Position