Operator`s manual

63 Text Mode Control: Section 5.3.8.

0 Disable 1 & 2.

1 Enable auto-print mode

2 Clear all previous text upon receiving new data.

3 Enable 1 & 2.

XX 64 Auto Print String Count: ^A tells the printer how many text strings to accept

before printing. Section 5.3.

67 24 Hour Date Format:

0 24 hour format.

1 12 hour format.

70 Clock Chip Initialization: Non-Destructive initialization of battery backed clock

functions. This command should be sent whenever the clock chip is replaced or

erratic clock operation exist.

X 71 Clear Single Non-Volatile Saved Graphic: This command will clear a single

non-volatile saved graphic file and open the slot for a new graphic.

XX 73 Load copies count: Tells the printer to print a group of labels. Will not increment

serial numbers (use ^D75).

1 74 Infinity Print: Prints a batch of labels like ^D75 but will continue to print until the

machine is turned off.

XX 75 Load Label Count: Tells the printer to print a batch of labels using the serial

number function if enabled.