Operator`s manual

28 Show Head Size: This function will send the print head dot count to the

communications port. The output is in standard ASCII and will be 640, 768, or 832.

29 Printer Statistics:

0 Print statistics to serial port

1 Print statistics on a label

2 Clear the printed labels variable in the statistics

3 Clear the printed inches variable in the statistics

30 Change Clock: Use the sequence below to set the time and date of the optional

real-time clock:

^D30 (return)

HH:MM:SS (return)

DD/MM/YY/W (return)

31 Show time: The printer will respond by sending the current time to the

communications port. The output is standard ASCII and in the format;

Hours,Min,Sec.

For example: 12:38:59

32 Soft Reset: Restores printer to power-up settings. Also used to set the battery

backed ram fields in memory. Section 5.3.

33 Display Model and Revision Number.

34 Automatic Daylight Savings Time Adjustment:

0 Disable

1 Enable

35 Contrast Window Adjust: A value from 60 to 140 in increments of 1.