Operator`s manual

56
To read a file that has previously been sent to the printer, use the ^AX^D545 command,
where ^AX denotes the file (slot #) to be read. The printer will send the file to the serial port.
If you are using a terminal or terminal utility, the file will be sent to your screen.
Sample files: File #1 initiates the save format file memory and downloads saved format file
#1. File #1 includes all the fixed data on the label. File #2 is the file that initiates processing
of file #1 and includes all variable data for the format. File #2 also prints the label.
File #3 shows how a second saved format would look. The data and processing commands
for file #3 are contained in file #4.
NOTE: <ESC> = 1B hex, 27 decimal, or the ASCII equivalent ^[
File #1
^A1^D595
^D575
4,288,193,5,19,30,0,1,1485
1,100,20,10,1,10,0,2,1,1,,15
1,210,20,7,1,10,0,2,2,2,,115
1,152,154,12,12,,0,2,2,100,,185
1,130,54,12,32,,0,2,2,2,,185
^D565
<ESC>
File #2
^A1^D585
^D25
24 PRINTS $ 3.79 204963403795
^D35
File #3
^A2^D595
^D575
4,620,161,,18,35,,73,35
1,120,110,50,1,115
2,120, 80,70,1,105
3,120, 60,70,1,105
4,120, 40,70,1,105
^D565
<ESC>
File #4
^A2^D585
^D25
MICROCOM CORPORATION5
8333-A GREEN MEADOWS DR., N.5
WESTERVILLE, OH 430815
(614) 548-62625
^D35