Operator`s manual

XX 81 Disable Single Serial Number Field: Will disable an individual serial number

field.

XX 82 Enable Single Serial Number Field: Will recall a stored serial number (1-16) and

place it into an individual serial number field on the label. XX determines the stored

serial number slot to be recalled. The TSN (Text String Number) is selected by

following the ^AXX^D825 with the TSN surrounded by quotes ("TSN"5). This

command is not stored between labels, it must be sent each time a format is sent

and must be located after the ^D57 command and format information.

XX 83 Select Stored Serial Number to increment: Tells the printer which stored serial

number to increment. See section 4.5 on text string numbers. The ^A value states

which serial number is selected.

XX 84 Select Stored Serial Number to decrement: Tells the printer which stored serial

number to decrement. See section 4.5 on text string numbers. The ^A value states

which serial number is selected.

85 Clear All Stored Serial Numbers: This function will erase any serial numbers

stored in memory.

XX 86 Load New Serial Number Into Memory: This command loads a serial number

into non-volatile memory. XX is used to select the serial number slot (1-16). The

actual serial number, up to 9 characters, is placed in quotes and follows the

^AXX^D865.

XX 87 Load Increment/Decrement Value Into Memory: Will load and store a step

value into non-volatile memory. The stored serial number to be affected is chosen

with the XX variable and the actual step value, up to 9 characters, is entered by

following the ^AXX^D875 with the step value surrounded by quotes.

XX 88 Send Serial Number To Serial Port: ^A specifies which stored serial number (1-

16) to send.

XX 89 Send Increment/Decrement Value To Serial Port: ^A specifies which stored

increment/decrement value (1-16) to send.