Operator`s manual

CC CHARACTER COUNT

This parameter determines the number of characters that will be used in a field. If the

number of characters in the selected text string is more than the quantity specified by CC,

then the remainder of the text string is ignored. If the text string has less than the number of

characters specified by this parameter, then only those characters defined by the text string

are printed. For example, the text string - MICROCOM - would be 8 characters long.

TCI TEXT CONVERSION IDENTIFIER

This parameter determines what form the text string will be printed in. The following values

define which text conversion method is used:

1 Text (ASCII)

2 Text Surrounded by Asterisks (Code 3 of 9)

3 Text with UPC-A/UPC-E Checksum Digit Printed

8 Non-Volatile Soft Fonts

11 Volatile Soft Fonts

12 UPC-A Barcode

13 UPC-E Barcode (SEND 11 DIGITS)

14 UPC-E Barcode (SEND 7 DIGITS)

15 Interleaved 2 of 5 Barcode

16 Code 3 of 9 Barcode

*17 Text with UPC-E Checksum and Extended Bars Added

20 EAN-13 Barcode

21 EAN-8 Barcode

*22 Text with EAN-13 Checksum and Extended Bars Added

*23 Text with EAN-8 Checksum and Extended Bars Added

24 MSI 1 (Plessey)

25 MSI 2 (Plessey)

26 MSI 3 (Plessey)

*28 Text with MSI Checksum Added - Type 1

*29 Text with MSI Checksum Added - Type 2

*32 Text with UPC-A Checksum and Extended Bars Added

*33 Text with UPC-A With Extended Bars Added

36 Postnet

40 Code 128 barcode (Automatic Compression)

41 Code 128 barcode (No Compression)

42 Codabar barcode

43 Code 93 barcode

44 AS-10 barcode

* Refer to Section 7.1.1 on how to use these TCI's.

Example: For the string - 1234567

A TCI of 1 would print ASCII text.

A TCI of 42 would print a Codabar barcode.