Operator`s manual

19
4.4 LABEL HEADER
The header consist of eleven parameters. These parameters contain information about the label. It
is not necessary to enter information for all of the parameters: If a parameter is left blank, then the
default value will be used. A carriage return must follow the label header parameters.
The value of measurement for many of the header elements is the dot. There are 203 dots per inch
on a 465 print head (8 dots/mm). There is a maximum 832 dots in the X direction (width). The Y
direction (length) is 8120 dots or 40 inches long.
Most header parameters can be supplied using the autosize command. (section 5.3.3.)
Below is a list of the header element mnemonics and their default values:
HFM, LSX, LSY, WEB, GAP, DPS, LCB, AGD, SPG, OFX, OFY
0, 832, 443, 10, 10, 48, 0, 1, 535, 0, 0