Operator`s manual

2.4 FRONT PANEL KEYPAD AND STATUS DISPLAY

The front panel contains a three button keypad and a three LED status display.

Keypad Layout

Figure 4

2.4.1 LABEL PRINT KEY

The front panel keypad (see figure 4) contains a 'LABEL PRINT' key. If this key is pressed the unit

will print the currently loaded label format or the default label if no format has been loaded. If the

printer is in the process of printing a predetermined quantity of labels (see ^D73, section 5.3),

pressing the 'LABEL PRINT' key will pause the printer. Pressing the key again will allow the printer

to continue the batch.

If the 'LABEL PRINT' key is depressed when the power is turned on, the printer is put into test

mode and a statistics and test label will be printed (see ^D29 chapter 5.3.10). This test mode is

also useful to temporarily set all software dip switches to default.

2.4.2 LINE FEED KEY

Pressing and holding the 'LINE FEED' key will cause the printer to advance until released. This key

can be use to load and align paper stock.