Operator`s manual

95
APPENDIX E: HARDWARE DIP SWITCHES (inside printer)
It is necessary to open the right side cover and remove the two (2) screws which secure the left
side cover (see figure X). Once the cover is opened, the switches are located in the upper left hand
corner of the PC board (see figure X1).
Note: Disconnect power cord before opening printer.
Hard Switch 1
12345678
xxxxxxxx
*******. Not Used
******.) Not Used
*****.)) 0=No Parity, 1=Enable Parity
****.))) 0=Odd Parity, 1=Even Parity
***.)))) 0=8 Data Bits, 1=7 Data Bits
**.)))))))),
*.)))))))),*
.)))))))),** Baud Rate Select
000 300 Baud
001 600 Baud
010 1200 Baud
011 2400 Baud
100 4800 Baud
101 9600 Baud
110 19200 Baud
111 38400 Baud