Operator`s manual

Appendix D Quick Reference Command Summary

412 Operators Manual

X 35 Contrast Window Adjust: This is the temporary contrast adjustment. The ^AX

is between 60 and 140%

1 60% of Base

2 70% of Base

3 80% of Base

4 90% of Base

5 100% of Base

6 110% of Base

7 120% of Base

8 130% of Base

9 140% of Base

XX 36 Adjust Contrast Base: Non-Volatile command. The ^AXX is between 10 and

200%. Section 5.3.

39 Auto-Size Label: Section 5.3.3.

0 Clears the use of auto-size values set by ^A1^D39.

1 Uses the values obtained for the variables instead of what the user supplies in

the header of the format file.

2 Automatically sizes the label and displays on the screen the values for the size

variables.

3 Same as ^A2^D39, but prints the values on a label, instead of on the screen.

5 Diagnostic Mode

40 Clear Commands 41-51.

XX 41 Load number of fields in layout (HFM): Preceded by ^A.

XX 42 Load label width in dots (LXS): Preceded by ^A.

XX 43 Load label height in dots (LSY): Preceded by ^A.

XX 44 Load web size in dots (WEB): Preceded by ^A.

XX 45 Load gap size in dots (GAP): Preceded by ^A.

XX 46 Load print speed (DPS): Preceded by ^A.

XX 47 Load label control byte (LCB): Preceded by ^A.

XX 48 Load number of steps to activate gap detector (AGD): Preceded by ^A.

XX 49 Load number of steps past gap (SPG): Preceded by ^A.

XX 50 Load X direction offset (OFX): Preceded by ^A.

XX 51 Load Y direction offset (OFY): Preceded by ^A.