Operator`s manual

Quick Reference Command Summary Appendix D
412 Operators Manual
88
^A ^D Command
2 Text string entry mode: Precedes the text strings that are supplied to the
various fields in the label (Equivalent to ^B).
3 Print Command: Prints a single label or starts the printing of a batch of labels.
(Equivalent to ^C)
5 Send Printer Status: (Equivalent to ^E)
11 Print a Test Label: (Equivalent to ^K)
12 Print a Blank Label: (Equivalent to ^L)
20 Bits per Second: This command changes the serial port communications
speed. Speeds over 38400 bps will cause the printer to utilize flow control
during the print routine.
0 110 bps
1 150 bps
2 300 bps
3 600 bps
4 1200 bps
5 2400 bps
6 4800 bps
7 9600 bps
8 19200 bps
9 38400 bps
10 57600 bps
11 115200 bps
21 Change SW1: Software dip switch #1. A Non-Volatile command. Below is the
^AB sequence:
12345678
^ABxxxxxxxx
*******.Q 1=XON/XOFF Enable, 0=Disable
******.)Q 1=8 Data Bits, 0=7 Data Bits
*****.))Q 1=Echo Enable, 0=Disable
****.)))Q 1=No Parity, 0=Enable Parity
***.))))Q 1=Odd Parity, 0=Even Parity
**.)))))Q 1=Ignore Control Codes, 0=Accept
*.)))))))))),
.)))))))))),* Enquiry Response
00 = Control Codes
10 = Text Equivalent
11 = ^ Equivalent