Operator`s manual

Designing Labels Using LDS Chapter 4
412 Operators Manual
30
FO FIELD ORIENTATION
This parameter defines the rotation of each field on the label. The point of rotation is
determined from the field justification.
0 0 degrees (normal rotation).
1 180 degrees (upside-down rotation).
2 90 degrees (left rotation).
3 270 degrees (right rotation).
FJ FIELD JUSTIFICATION
This parameter defines the justification of each field on the label.
0 Left justified above base-line.
1 Right justified above base-line.
2 Left justified below base-line.
3 Right justified below base-line.
4 Centered above base-line.
5 Centered below base-line.
Starting position definitions:
Table 6 shows how to obtain proper character placement relative to orientations and
justifications.
Character Starting Positions Relative to Field Orientations and Field Justifications
Rotation Field Orientation and Justification
0,180 Degrees 0 - Left justified above base-line
1 - Right justified above base-line
2 - Left justified below base-line
3 - Right justified below base-line
4 - Centered above base-line
5 - Centered below base-line
90,270 Degrees 0 - Left justified above base-line
1 - Right justified above base-line
2 - Left justified below base-line
3 - Right justified below base-line
4 - Centered on Y axis, right of X coordinate
5 - Centered on Y axis, left of X coordinate
Character Starting Positions
Table 6