User`s guide

Printer Modes Chapter 4
28 326M User’s Guide
Figure 12 ^D326-List Settings Example
Settings (D326 or <Ctrl> V)
Operational
Print Speed: (D635) 6.0 ips
Detector mode: (D636) 0 (none)
Slew Speed: (D645) 6.0 ips
Darkness: (D690) 75 (Dark)
Retraction delay: (D641) 0.5 sec.
Print delay: (D640) 0.0 sec.
Labels printed: (D655) 42
Distances
Label width (LSX): (D631) 3.34 inches
Label height (LSY): (D632) 1.5.12 inches
Reg. mark height (GAP): (D633) 0.148 inches
To reg’n mark (DRM): (D634) 0.0 inches
X offset (OFX): (D637) 0.0 inches
Y offset (OFY): (D638) 0.0 inches
Dist. Past Gap (DPG): (Auto) 1.225 inches
Activate Gap Det (AGD) (Auto) 0.0 inches
Advance/retract: (D642) 0.512 inches
Roll diam. ref. length: (D646) 10.0 inches
Black line det to head: (D648) 2.32 inches
Gap det to head: (D649) 2.34 inches
Printhead
Width: (D647) 4.094 inches
Resolution: (D647) 203 dpi
Serial port settings (D670) 9600,N,8,1
Ethernet Active at 10/100
MAC: 0x000257795634
Internet Protocol
Printer port number: (D674) 23
Printer addr: (D675) 192.168.200.3
Server/Host addr: (D676) 192.168.200.1
Gateway addr: (D677) 192.168.200.1
Broadcast addr mask: (D678) 192.168.200.255
Net addr mask: (D679) 255.255.255.0
Parallel port settings: Not installed
USB port settings Not installed
Thresholds
Gap: (D680) 30
Black line: (D681) 120
Stock: (D682) 110
High head temperature: 147
Low head temperature: 24
PWM periods
Gap: 12
Black line: 41
Label Present: 64
Stacker: 64
NOTE: Some items may not be correct until after a scripted
label has been printed or Auto-size (D310) has been run.