User`s guide

Printer Specifications Chapter 1
4 326M User’s Guide
1.3 Media Specifications
Media Types
Continuous, die-cut, preprinted and tag stock
either rolled (up to 8” in diameter) or fanfold.
Maximum Media Thickness
.010” (.25mm) * see note below.
Maximum Media Width
326M = 3.5” (90mm) ** see note below.
426M = 4.5” (115mm) *** see note below.
Table 3 Media Specifications
The printers may be optimally configured with a fixed media guides to assist in the
installation of media.
*NOTE: The printers may print on thicker media types depending on the pliability of the
material; however, this requires testing and evaluation. Contact your authorized Microcom
Corporation representative for additional information regarding testing and evaluation of
thicker or rigid media types.
**NOTE: The 326M printer’s media path has a maximum width of 3.5” while the actual
printable width is 3.15” for the 203 DPI and 3.189” for the 300 DPI print head.
***NOTE: The 426M printer’s media path has a maximum width of 4.5” while the actual
printable width is 4.094” for the 203 DPI and 4.252” for the 300 DPI print head.