Specifications

Diagnostics and Troubleshooting Chapter 6
82 LDSII Programming Guide - 880015-0123
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses Definition
0x8A >FLASH DEFRAGMENTING<
Flash file system is optimizing
memory.
0x8F >STOCK NOT LOADED<
The printer was powered up with
out media installed.
0x90 >RETRACTION DELAY<
The retraction has been
delayed.
0x91 >PRINT DELAY< The printing has been delayed.
0xB0 >FLASH MEMORY LOW<
The Flash memory file space is
95% full.
0xC0 >BUTTON 1 TAPPED<
The print button has been
pressed.
0xC1 >BUTTON 1 HELD< The print button has been held.
0xD0 >TEMPERATURE OUT OF RANGE<
The print head temperature is
out of operating range.
0xD1 >NONEXISTENT COMMAND<
The received command does not
exist.
0xD2 >INCOMPLETE COMMAND<
The received command is not
complete.
0xD3 >ZIP FILE ERROR<
The received Zipped file has an
error.
0xD4 >FILE CONVERSION ERROR<
The file was not converted
properly.
0xD5 >UNSUPPORTED FILE TYPE<
The received file is not
recognized.
0xD6 >FILE NOT FOUND<
The requested file does not exist
or cannot be found.
0xD7 >INADEQUATE ACCESS MODE<
Incorrect password to a higher
access level.
0xD9 >FILE IS READ ONLY<
File is read only and cannot be
deleted.
0xDA >INADEQUATE FLASH SPACE<
Cannot save an item to the flash
memory due to lack of space.
0xDB >I/O FAILURE<
The Input/Output circuitry has
failed.
0xDC >FONT/GRAPHIC NOT FOUND<
The requested file does not exist
or cannot be found.