Specifications

Chapter 6 Diagnostics and Troubleshooting
LDSII Programming Guide - 880015-0123 81
Byte Mode
Responses
(ASCII Hex)
Text and Verbose Mode Responses Definition
0x13
>CUTTER WATCHDOG
WON’T RESET<
The software cannot reset the
cutter after a stopped condition.
0x1C >MISSING LABEL<
Generated if more than one die-
cut label has been detected.
0x1D >INCOMPLETE FORM<
A complete script did not print on
a >STOCK OUT< condition.
0x20 >CATCH TRAY FULL<
The PMH has reached its
capacity.
0x21 >INPUT 1<
The Input 1 sensor has been
actuated.
0x22 >INPUT 2<
The Input 2 sensor has been
actuated.
0x30 >SCRIPT ERROR<
An error with the script has been
detected.
0x31 >INVALID PARAMETER<
The printer has detected an
invalid parameter.
0x32 >PARSER ERROR<
An error with the printer’s parser
has occurred.
0x40 >COMM ERROR<
A Communication error has
been detected.
0x51 >FLASH ERROR<
The flash memory has
encountered an error.
0x80 >RESTARTED<
The printer has been powered
on or the power has been reset.
0x81 >READY<
The printer is in ready to receive
data.
0x82 >BUSY< The printer is currently busy.
0x83 >PAUSED< The printer has been paused.
0x84 >PRINTING< The printer is currently printing.
0x85 >FEEDING<
The printer is currently feeding
media.
0x86 >LABEL/TAG PRESENT<
Media has been presented in a
dispense mode.
0x87 >STOCK ADVANCED< The media has been advanced.