Operator`s manual

Printer Specifications Chapter 1
1-2 324M/424M Operator’s Manual - 880026-0144
1.3 Media Specifications
Media Types
Continuous, die-cut, preprinted and tag stock either rolled
or fanfold
Maximum Media Thickness .010” (.25 mm)*
Maximum Media Width
324M = 3.5” (89 mm)**
424M = 4.5” (115 mm)***
Table 1-3 Media Specifications
*NOTE: The printers may print on thicker media types depending on the pliability of the
material; however, this requires testing and evaluation. Contact your authorized Microcom
Corporation representative for additional information regarding testing and evaluation of
thicker or rigid media types.
**NOTE: The 324M printer’s media path has a maximum width of 3.5” while the actual
printable width is 3.15” for the 203 DPI and 3.189” for the 300 DPI print head.
***NOTE: The 424M printer’s media path has a maximum width of 4.5” while the actual
printable width is 4.095” for the 203 DPI and 4.252” for the 300 DPI print head.
The printers may be optimally configured with fixed media guides to assist in the installation
of media.