Datasheet

10 SDC2130/SDC2150 Motor Controller Datasheet Version 1.2. May 5, 2011
The SDC2130/SDC1250 uses a conduction plate at the bottom of the board for heat extraction. For best results,
attach firmly with thermal compound paste against a metallic chassis so that heat transfers to the conduction
plate to the chassis. If no metallic surface is available, mount the controller on spacers so that forced or natural air
flow can go over the plate surface to remove heat.
Mechanical Specifications
TABLE 11.
Parameter Measure Point Min Typ Max Units
Weight Board 100 (3.5) g (oz.)
Power Wire Gauge Terminal strip 12 AWG
0.16"
16.26mm
4.1mm
0.64"
19mm
0.75"
FIGURE 15. SDC2130/SDC2150 front view and dimensions
39.1mm
1.54"
41.78mm
1.645"
14.73mm
0.58"
30mm
1.18"
62.2mm
2.45"
70mm
2.76"
13.2mm
0.519"
62.2mm
2.45"
70mm
2.76"
FIGURE 16. SDC2130/SDC2150 top view and dimensions