Specifications
Page A-2 Appendix A
SCSI
SCSI
(PRA-00222-00)
EXTERNAL SCSI BUS
TERMINATOR
CONFIGURATION B
CONFIGURATION A
BAIL LOCKS
MAC821
#4 SCREW
AND WASHER
External Terminator Installation
The illustration shows two different types of external SCSI connectors.
1.Configuration"A" shows an extended external SCSI connector and bail
locks for holding the terminator in place. This configuration is used on
several different models of computers sold by Alpha Micro, including
AM-990 and AM-1600/1400 computers. The terminator is installed by
sliding it over the connector and then latching the bail locks into the
notches in the terminator.
2.Configuration"B" shows a flush mounted external SCSI connector. This is
the configuration used on pedestal style AM-2000 computers and
AM-2001 subsystems. In this configuration, the terminator inserts into a
cutout in the sheet metal and over the SCSI connector. The terminator is
held in place with two #4screws and washers.
PDI-00137-50, Rev. A01