Specifications

Page 30 Installation Instructions: AM-137 Board AM-1600/1400 Upgrade
Table 1. Front Panel Status Codes Generated by the Monitor
CODE MEANING
4 System is out of QUEUE blocks.
8 A/C power dropped below an acceptable level.
10 An interface driver (.IDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
11 A terminal driver (.TDV) defined in a TRMDEF statement in the
system initialization command file was not found in account [1,6]
on the boot device.
12 System Initialization Command file was not found.
Table 2. Front Panel Status Codes Generated by the Boot PROMS
CODE MEANING
F System is now clearing and sizing memory.
20 The system is beginning to execute the boot PROM. An error at
this point indicates your computer has a faulty PROM. Contact
your dealer.
21 The system is transferring the instructions from the PROM into its
Random Access Memory (RAM). If an error occurs here, your
computer might have a bad PROM or bad memory.
PDI-00137-50, Rev. A01