Specifications

Page 28 Installation Instructions: AM-137 Board AM-1600/1400 Upgrade
LOG SYS:
RETURN
WRMGEN
RETURN
Warm Boot Monitor Generator X.X(XXX)
Input monitor: AMOS32.MON
RETURN
System disk driver: SCZRR.DVR
RETURN
Number of logical units: 10
RETURN
Bitmap size: 3969
RETURN
Language definition table name:
RETURN
;Pressing RETURN defaults to English
SCSI dispatcher (RETURN if none): SIMRR.SYS
RETURN
System terminal interface driver: AM318.IDV
RETURN
System terminal interface port number: 0
RETURN
System terminal interface baud rate: 19200
RETURN
System terminal driver: AM65.TDV
RETURN
Enter name of SECONDARY DEVICE(s) to be defined into system,
one per line. Enter blank to terminate loading.
Device to define: /STR0
RETURN
Device to define: TRM
RETURN
Device to define:
RETURN
Enter name of program(s) to be preloaded into SYSTEM MEMORY,
one per line. Enter blank to terminate loading.
Program to load: SYSMSG.USA
RETURN
Program to load: STR.DVR[1,6]
RETURN
Program to load: CMDLIN.SYS
RETURN
Program to load: SCNWLD.SYS
RETURN
Program to load:
RETURN
Enter name of program(s) to be preloaded into USER PARTITION,
one per line. Enter blank to terminate loading.
Program to load: LOG.LIT
RETURN
Program to load: DIR.LIT
RETURN
Program to load: COPY.LIT
RETURN
Program to load: DUMP.LIT
RETURN
Program to load: MTURES.LIT
RETURN
Program to load: MTUDIR.LIT
RETURN
Program to load: FMTSCZ.LIT
RETURN
Program to load: FMTSCZ.OVR
RETURN
Program to load: DSKANA.LIT
RETURN
Program to load: DSKDDT.LIT
RETURN
Program to load: SYSACT.LIT
RETURN
Program to load:
RETURN
;after you enter this return, your
AMOSL.WRM file will be created.
PDI-00137-50, Rev. A01