Specifications

Page 16 Installation Instructions: AM-137 Board AM-1600/1400 Upgrade
Very little force is required to install a SIMM module. If you’re having problems
getting the SIMM module installed in the connector, stop and take a moment to
examine both the SIMM module and the connector. Make sure you are installing
the SIMM as shown in the illustration.
METAL RETAINER
CLIP
METAL RETAINER
CLIP
MAKE SURE THIS CURVE
IN THE SIMM CARD ALIGNS
WITH PIN-1 IN THE
SIMM CONNECTOR.
PIN-1 INDICATOR
SIMM
CONNECTOR
MC1059
SIMM (SINGLE INLINE
MEMORY MODULE)
Memory SIMM Module Installation
11.Make sure the AM-137 board’s memory configuration jumpers are configured to
match the capacity of the SIMM you installed. The memory jumper configuration
settings are shown in the AM-137 board illustration.
12.Your AM-137 upgrade installation kit includes a duplicate SSD chip. Install the
new SSD chip at location U15 on the AM-137 board. The SSD chip must be
plugged into the socket following the pin-1 orientation shown in the AM-137 board
illustration. The SSD chip from your old CPU board must be returned to Alpha
PDI-00137-50, Rev. A01