User Manual

Figure 1 : Fubarino™ Mini Pin Map

Entering Bootloader Mode

To enter bootloader mode (also called programming mode) simply press the PRG button while pressing

and releasing the RESET button. As long as the PRG button is held down when the RESET button is

released, the bootloader will start waiting for a new program to be downloaded over USB. It will wait

indefinitely.

The bootloader on the Fubarino™ Mini implements the avrdude STK500 v2 protocol, just like the other

chipKIT

/MPIDE boards. For Windows users, you may need to install the drivers\Stk500v2.ini file so

that the Fubarino

Mini is recognized by the PC. Mac and Linux users do not have to install any drivers.

Programming in MPIDE

To program the Fubarino Mini board from within MPIDE, simply download the latest MPIDE version,

http://bit.ly/getmpide, unzip and run it, and select “Fubarino Mini” from the Tools->Boards->Fubarino