Datasheet

 2016-2019 Microchip Technology Inc. DS50002489D-page 41
RN4870/71
10.3.3 HELPFUL WEB SITES
A document that can be used as a starting point in
understanding the use of Short Range Devices (SRD)
in Europe is the European Radio Communications
Committee (ERC) Recommendation 70-03 E, which
can be downloaded from the European Radio Commu
-
nications Committee (ECC) at: http://www.ecodo-
cdb.dk/.
Additional helpful web sites are:
• Radio Equipment Directive (2014/53/EU): 
https://ec.europa.eu/growth/single-market/euro-
pean-standards/harmonised-standards/red_en
• European Conference of Postal and Telecommu-
nications Administrations (CEPT): http://
www.cept.org
• European Telecommunications Standards Insti-
tute (ETSI): http://www.etsi.org
• The Radio Equipment Directive Compliance
Association (REDCA):
http://www.redca.eu/
10.4 Japan
The RN4870/71 module has received type certification
and is labeled with its own technical conformity mark
and certification number as required to conform to the
technical standards regulated by the Ministry of Internal
Affairs and Communications (MIC) of Japan pursuant
to the Radio Act of Japan.
Integration of this module into a final product does not
require additional radio certification provided installa
-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required:
• If the host product is subject to electrical appli-
ance safety (for example, powered from an AC
mains), the host product may require Product
Safety Electrical Appliance and Material (PSE)
testing. The integrator should contact their confor
-
mance laboratory to determine if this testing is
required.
• There is a voluntary Electromagnetic Compatibil-
ity (EMC) test for the host product administered
by VCCII:
http://www.vcci.jp/vcci_e/index.html
10.4.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN4870/71 module must follow Japan marking
requirements. The integrator of the module should refer
to the labeling requirements for Japan available at the
Ministry of Internal Affairs and Communications (MIC)
website.
The RN4870 module is labeled with its own technical
conformity mark and certification number. The final
product in which this module is being used must have
a label referring to the type certified module inside:
Due to the limited size of the RN4871, the technical
conformity mark and certification number is not dis
-
played on the module. Therefore, the final product in
which this module is being used must have a label
referring to the type certified module inside:
10.4.2 HELPFUL WEB SITES
Ministry of Internal Affairs and Communications (MIC):
http://www.tele.soumu.go.jp/e/index.htm
Association of Radio Industries and Businesses
(ARIB):
http://www.arib.or.jp/english/
10.5 Korea
The RN4870/71 module has received certification of
conformity in accordance with the Radio Waves Act.
Integration of this module into a final product does not
require additional radio certification provided installa
-
tion instructions are followed and no modifications of
the module are allowed.
10.5.1 LABELING AND USER
INFORMATION REQUIREMENTS
The label on the final product which contains the
RN4870/71 module must follow KC marking require
-
ments. The integrator of the module should refer to the
labeling requirements for Korea available on the Korea
Communications Commission (KCC) website.
The RN4870 module is labeled with its own KC mark.
The final product requires the KC mark and certificate
number of the module:
Contains transmitter module with certificate number:
Contains transmitter module with certificate number: