User Manual
2014 Microchip Technology Inc. DS50002325A-page 7
RN41/42 EVALUATION KIT
USER’S GUIDE
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
Product Name. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Warranty Registration
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This user’s guide describes how to use the RN-41-EK and RN-42-EK Evaluation
Boards. The document is organized as follows:
• Chapter 1. “Overview” – This chapter describes the hardware and software
setup for RN41 and RN42 Evaluation Kits.
• Chapter 2. “Getting Started” – This chapter describes the RN41 and RN42
Evaluation Kit board as an independent development board for exploring the
ASCII command set and prototyping of embedded systems.
• Chapter 3. “Application Design Concerns” – This chapter describes the
application design concerns of the RN41 and RN42 modules.
• Appendix A. “RN41 and RN42 Evaluation Kit Schematics” – This appendix
includes a schematic of the RN-41-EK and RN42-EK Evaluation Boards, PCB
layout and the Bill of Materials.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs and/
or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.