User Manual

RN41/42 Evaluation Kit User’s Guide
DS50002325A-page 26  2014 Microchip Technology Inc.
FIGURE 2-5: DISCOVERY - ADD A BLUETOOTH
®
DEVICE
2.9.2 Pairing
To pair with the evaluation board, double click the board’s name in the list. The firmware
automatically stores up to 8 pairings from remote hosts using the First-In, First-Out
(FIFO) method. The evaluation board’s Default Authentication mode is the SSP key-
board mode (no pin required). However, most PCs require authentication and display
a pin code. If a user uses a Bluetooth USB dongle (e.g., RN-USB-T), host PC prompts
the user to choose how the pairing must be done. Figure 2-6 shows examples of pairing
with and without a pin code.
Note: If host PC displays a pin code, user must select the YES button to confirm
if correct.