Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 657
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
TABLE 37-45: USB OTG ELECTRICAL SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 2.1V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial 
-40°C  T
A  +125°C for Extended
Param.
No.
Symbol Characteristics
(1)
Min. Typ. Max. Units Conditions
USB313 V
USB3V3 USB Voltage 3.0 — 3.6 V Voltage on VUSB3V3
must be in this range for
proper USB operation
Low-Speed and Full-Speed Modes
USB315 V
ILUSB Input Low Voltage for USB Buffer — — 0.8 V —
USB316 VIHUSB Input High Voltage for USB Buffer 2.0 — — V —
USB318 VDIFS Differential Input Sensitivity 0.2 — — V The difference between
D+ and D- must exceed
this value while VCM is
met
USB319 VCM Differential Common Mode Range 0.8 — 2.5 V —
USB321 V
OL Voltage Output Low 0.0 — 0.3 V 1.425 k load
connected to V
USB3V3
USB322 VOH Voltage Output High 2.8 — 3.6 V 14.25 k load
connected to ground
Hi-Speed Mode
USB323 V
HSDI Differential input signal level 150 — — mV —
USB324 V
HSSQ SQ detection threshold 100 — 150 mV —
USB325 VHSCM Common mode voltage range -50 — 500 mV —
USB326 VHSOH Data signaling high 360 — 440 mV —
USB327 V
HSOL Data signaling low -10 — 10 mV —
USB328 VCHIRPJ Chirp J level 700 — 1100 mV —
USB329 VCHIRPK Chirp K level -900 — -500 mV —
USB330 Z
HSDRV Driver output resistance — 45 —  —
Note 1: These parameters are characterized, but not tested in manufacturing.