Datasheet

PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
DS60001320B-page 624 Preliminary  2015 Microchip Technology Inc.
37.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
PIC32MZ EF device AC characteristics and timing
parameters.
FIGURE 37-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
VDD/2
CL
RL
Pin
Pin
VSS
VSS
CL
RL =464
Load Condition 1
– for all pins except OSC2 Load Condition 2 – for OSC2 (in EC mode)
TABLE 37-16: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
AC CHARACTERISTICS
Standard Operating Conditions: 2.1V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial 
-40°C  TA  +125°C for Extended
Param.
No.
Symbol Characteristics Min. Typical
(1)
Max. Units Conditions
DO50
COSCO OSC2 Pin — — 15 pF In HS mode when the external
clock is used to drive OSC1
DO56
CL All I/O pins (except pins
used as CxOUT)
— — 50 pF EC mode for OSC2
DO58 CB SCLx, SDAx — — 400 pF In I
2
C™ mode
DO59 CSQI All SQI pins — — 10 pF —
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.