Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 611
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
37.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of the PIC32MZ EF electrical characteristics. Additional information will be provided
in future revisions of this document as it becomes available.
Absolute maximum ratings for the PIC32MZ EF devices are listed below. Exposure to these maximum rating conditions
for extended periods may affect device reliability. Functional operation of the device at these or any other conditions,
above the parameters indicated in the operation listings of this specification, is not implied.
Absolute Maximum Ratings
(See Note 1)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on VDD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant, with respect to VSS (Note 3)......................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD  2.1V (Note 3)........................................ -0.3V to +5.5V
Voltage on any 5V tolerant pin with respect to VSS when VDD < 2.1V (Note 3)........................................ -0.3V to +3.6V
Voltage on D+ or D- pin with respect to VUSB3V3 ..................................................................... -0.3V to (VUSB3V3 + 0.3V)
Voltage on VBUS with respect to VSS ....................................................................................................... -0.3V to +5.5V
Maximum current out of VSS pin(s).......................................................................................................................200 mA
Maximum current into VDD pin(s) (Note 2)............................................................................................................200 mA
Maximum current sunk/sourced by any 4x I/O pin (Note 4)....................................................................................15 mA
Maximum current sunk/sourced by any 8x I/O pin (Note 4)....................................................................................25 mA
Maximum current sunk/sourced by any 12x I/O pin (Note 4)..................................................................................33 mA
Maximum current sunk by all ports .......................................................................................................................150 mA
Maximum current sourced by all ports (Note 2)....................................................................................................150 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation of the device at those or any other conditions,
above those indicated in the operation listings of this specification, is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of device maximum power dissipation (see Table 37-2).
3: See the pin name tables (Table 2 through Table 4) for the 5V tolerant pins.
4: Characterized, but not tested. Refer to parameters DO10, DO20, and DO20a for the 4x, 8x, and 12x I/O
pin lists.