Datasheet

PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
DS60001320B-page 462 Preliminary  2015 Microchip Technology Inc.
REGISTER 28-14: ADCCMPENx: ADC DIGITAL COMPARATOR ‘x’ ENABLE REGISTER 
(‘x’ = 1 THROUGH 6)
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CMPE31
(1)
CMPE30
(1)
CMPE29
(1)
CMPE28
(1)
CMPE27
(1)
CMPE26
(1)
CMPE25
(1)
CMPE24
(1)
23:16
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CMPE23
(1)
CMPE22
(1)
CMPE21
(1)
CMPE20
(1)
CMPE19
(1)
CMPE18 CMPE17 CMPE16
15:8
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CMPE15 CMPE14 CMPE13 CMPE12 CMPE11 CMPE10 CMPE9 CMPE8
7:0
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CMPE7 CMPE6 CMPE5 CMPE4 CMPE3 CMPE2 CMPE1 CMPE0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-0 CMPE31:CMPE0: ADC Digital Comparator ‘x’ Enable bits
These bits enable conversion results corresponding to the Analog Input to be processed by the Digital
Comparator. CMPE0 enables AN0, CMPE1 enables AN1, and so on.
Note 1: This bit is not available on 64-pin devices.
Note 1: CMPEx = ANx, where ‘x’ = 0-31 (Digital Comparator inputs are limited to AN0 through AN31).
2: Changing the bits in this register while the Digital Comparator is enabled (ENDCMP = 1) can result in
unpredictable behavior.