Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 367
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
bit 5 ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of Sync character (0x55);
cleared by hardware upon completion
0 = Baud rate measurement disabled or completed
bit 4 RXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
bit 3 BRGH: High Baud Rate Enable bit
1 = High-Speed mode – 4x baud clock enabled
0 = Standard Speed mode – 16x baud clock enabled
bit 2-1 PDSEL<1:0>: Parity and Data Selection bits
11 = 9-bit data, no parity
10 = 8-bit data, odd parity
01 = 8-bit data, even parity
00 = 8-bit data, no parity
bit 0 STSEL: Stop Selection bit
1 = 2 Stop bits
0 = 1 Stop bit
REGISTER 22-1: UxMODE: UARTx MODE REGISTER (CONTINUED)
Note 1: These bits are present for legacy compatibility, and are superseded by PPS functionality on these devices
(see Section 12.4 “Peripheral Pin Select (PPS)” for more information).