Manualshelf

Datasheet

ManualsBrandsMicrochip ManualsEmbedded Processors & ControllersMicrocontroller 32 Bit TQFP-64
341342343344345346347348349350
2015 Microchip Technology Inc. Preliminary DS60001320B-page 341
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
bit 2 TXTHRIF: Transmit Buffer Threshold Interrupt Flag bit
1 = Transmit buffer has more than TXINTTHR words of space available
0 = Transmit buffer has less than TXINTTHR words of space available
bit 1 TXFULLIF: Transmit Buffer Full Interrupt Flag bit
1 = The transmit buffer is full
0 = The transmit buffer is not full
bit 0 TXEMPTYIF: Transmit Buffer Empty Interrupt Flag bit
1 = The transmit buffer is empty
0 = The transmit buffer has content
REGISTER 20-9: SQI1INTSTAT: SQI INTERRUPT STATUS REGISTER (CONTINUED)
Note 1: In the case of Boot/XIP mode, the POR value of the receive buffer threshold is zero. Therefore, this bit will
be set to a ‘1’, immediately after a POR until a read request on the System Bus bus is received.
Note: The bits in the register are cleared by writing a '1' to the corresponding bit position.