Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 297
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
REGISTER 15-1: DMTCON: DEADMAN TIMER CONTROL REGISTER
Bit Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
23:16
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
15:8
R/W-y U-0 U-0 U-0 U-0 U-0 U-0 U-0
ON
(1)
— — — — — — —
7:0
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
Legend: y = Value set from Configuration bits on POR
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-16 Unimplemented: Read as ‘0’
bit 15 ON: Deadman Timer Module Enable bit
(1)
1 = Deadman Timer module is enabled
0 = Deadman Timer module is disabled
The reset value of this bit is determined by the setting of the FDMTEN bit (DEVCFG1<3>).
bit 13-0 Unimplemented: Read as ‘0’
Note 1: This bit only has control when FDMTEN (DEVCFG1<3>) = 0.
REGISTER 15-2: DMTPRECLR: DEADMAN TIMER PRECLEAR REGISTER
Bit Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
23:16
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
15:8
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
STEP1<7:0>
7:0
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-16 Unimplemented: Read as ‘0’
bit 15-8 STEP1<7:0>: Preclear Enable bits
01000000 = Enables the Deadman Timer Preclear (Step 1)
All other write patterns = Set BAD1 flag.
These bits are cleared when a DMT reset event occurs. STEP1<7:0> is also cleared if the
STEP2<7:0> bits are loaded with the correct value in the correct sequence.
bit 7-0 Unimplemented: Read as ‘0’