Manualshelf

Datasheet

ManualsBrandsMicrochip ManualsEmbedded Processors & ControllersMicrocontroller 32 Bit TQFP-64
231232233234235236237238239240
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
DS60001320B-page 240 Preliminary 2015 Microchip Technology Inc.
REGISTER 11-22: USBDMAxA: USB DMA CHANNEL ‘x’ MEMORY ADDRESS REGISTER (‘x’ = 1-8)
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMAADDR<31:24>
23:16
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMAADDR<23:16>
15:8
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMAADDR<15:8>
7:0
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R-0 R-0
DMAADDR<7:0>
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-0 DMAADDR<31:0>: DMA Memory Address bits
This register identifies the current memory address of the corresponding DMA channel. The initial memory
address written to this register during initialization must have a value such that its modulo 4 value is equal
to ‘0’. The lower two bits of this register are read only and cannot be set by software. As the DMA transfer
progresses, the memory address will increment as bytes are transferred.
REGISTER 11-23: USBDMAxN: USB DMA CHANNEL ‘x’ COUNT REGISTER (‘X’ = 1-8)
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMACOUNT<31:24>
23:16
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMACOUNT<23:16>
15:8
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMACOUNT<15:8>
7:0
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
DMACOUNT<7:0>
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31-0 DMACOUNT<31:0>: DMA Transfer Count bits
This register identifies the current DMA count of the transfer. Software will set the initial count of the transfer
which identifies the entire transfer length. As the count progresses this count is decremented as bytes are
transferred.