Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 211
PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
REGISTER 11-3: USBCSR2: USB CONTROL STATUS REGISTER 2
Bit
Range
Bit
31/23/15/7
Bit
30/22/14/6
Bit
29/21/13/5
Bit
28/20/12/4
Bit
27/19/11/3
Bit
26/18/10/2
Bit
25/17/9/1
Bit
24/16/8/0
31:24
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-1 R/W-1 R/W-0
VBUSERRIE SESSRQIE DISCONIE CONNIE SOFIE RESETIE RESUMEIE SUSPIE
23:16
R-0, HS R-0, HS R-0, HS R-0, HS R-0, HS R-0, HS R-0, HS R-0, HS
VBUSERRIF SESSRQIF DISCONIF CONNIF SOFIF RESETIF RESUMEIF SUSPIF
15:8
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
7:0
R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1 U-0
EP7RXIE EP6RXIE EP5RXIE EP4RXIE EP3RXIE EP2RXIE EP1RXIE —
Legend: HS = Hardware Set
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 31
VBUSERRIE: V
BUS Error Interrupt Enable bit
1 =V
BUS error interrupt is enabled
0 =V
BUS error interrupt is disabled
bit 30
SESSRQIE: Session Request Interrupt Enable bit
1 = Session request interrupt is enabled
0 = Session request interrupt is disabled
bit 29
DISCONIE: Device Disconnect Interrupt Enable bit
1 = Device disconnect interrupt is enabled
0 = Device disconnect interrupt is disabled
bit 28
CONNIE: Device Connection Interrupt Enable bit
1 = Device connection interrupt is enabled
0 = Device connection interrupt is disabled
bit 27
SOFIE: Start of Frame Interrupt Enable bit
1 = Start of Frame event interrupt is enabled
0 = Start of Frame event interrupt is disabled
bit 26
RESETIE: Reset/Babble Interrupt Enable bit
1 = Interrupt when reset (Device mode) or Babble (Host mode) is enabled
0 = Reset/Babble interrupt is disabled
bit 25
RESUMEIE: Resume Interrupt Enable bit
1 = Resume signaling interrupt is enabled
0 = Resume signaling interrupt is disabled
bit 24
SUSPIE: Suspend Interrupt Enable bit
1 = Suspend signaling interrupt is enabled
0 = Suspend signaling interrupt is disabled
bit 23
VBUSERRIF: V
BUS Error Interrupt bit
1 =V
BUS has dropped below the VBUS valid threshold during a session
0 = No interrupt
bit 22
SESSRQIF: Session Request Interrupt bit
1 = Session request signaling has been detected
0 = No session request detected
bit 21
DISCONIF: Device Disconnect Interrupt bit
1 =In Host mode, indicates when a device disconnect is detected. In Device mode, indicates when a
session ends.
0 = No device disconnect detected
bit 20
CONNIF: Device Connection Interrupt bit
1 =In Host mode, indicates when a device connection is detected
0 = No device connection detected