Datasheet

 2015 Microchip Technology Inc. Preliminary DS60001320B-page 209

PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family

bit 10 RESUME: Resume from Suspend control bit

1 = Generate Resume signaling when the device is in Suspend mode

0 = Stop Resume signaling

In Device mode, the software should clear this bit after 10 ms (a maximum of 15 ms) to end Resume signal-

ing. In Host mode, the software should clear this bit after 20 ms.

bit 9 SUSPMODE: Suspend Mode status bit

1 = The USB module is in Suspend mode

0 = The USB module is in Normal operations

This bit is read-only in Device mode. In Host mode, it can be set by software, and is cleared by hardware.

bit 8 SUSPEN: Suspend Mode Enable bit

1 = Suspend mode is enabled

0 = Suspend mode is not enabled

bit 7 Unimplemented: Read as ‘0’

bit 6-0 FUNC<6:0>: Device Function Address bits

These bits are only available in Device mode. This field is written with the address received through a

SET_ADDRESS command, which will then be used for decoding the function address in subsequent token

packets.