Datasheet
Table Of Contents
- Power Management Modes
- High-Performance CPU
- Peripheral Features
- Analog Features
- Special Microcontroller Features
- Pin Diagrams
- Pin Diagrams
- Pin Diagrams
- Pin Diagrams
- Pin Diagrams
- Table of Contents
- Most Current Data Sheet
- Errata
- Customer Notification System
- 1.0 Device Overview
- 2.0 Guidelines for Getting Started with 16-Bit Microcontrollers
- 3.0 CPU
- 4.0 Memory Organization
- 4.1 Program Address Space
- 4.2 Data Address Space
- 4.2.1 Data Space Width
- 4.2.2 Data Memory Organization and Alignment
- 4.2.3 Near Data Space
- 4.2.4 SFR Space
- TABLE 4-2: Implemented Regions of SFR Data Space
- TABLE 4-3: CPU Core Registers Map
- TABLE 4-4: ICN Register Map
- TABLE 4-5: Interrupt Controller Register Map
- TABLE 4-6: Timer Register Map
- TABLE 4-7: Input Capture Register Map
- TABLE 4-8: Output Compare Register Map
- TABLE 4-9: I2Cx Register Map
- TABLE 4-10: UARTx Register Map
- TABLE 4-11: SPIx Register Map
- TABLE 4-12: PORTA Register Map
- TABLE 4-13: PORTB Register Map
- TABLE 4-14: PORTC Register Map(1)
- TABLE 4-15: Pad Configuration Register Map
- TABLE 4-16: A/D Register Map
- TABLE 4-17: CTMU Register Map
- TABLE 4-18: Analog Select Register Map
- TABLE 4-19: Real-Time Clock and Calendar Register Map
- TABLE 4-20: Triple Comparator Register Map
- TABLE 4-21: CRC Register Map
- TABLE 4-22: Clock Control Register Map
- TABLE 4-23: Deep Sleep Register Map
- TABLE 4-24: NVM Register Map
- TABLE 4-25: Ultra Low-Power Wake-up Register Map
- TABLE 4-26: PMD Register Map
- 4.2.5 Software Stack
- 4.3 Interfacing Program and Data Memory Spaces
- 5.0 Flash Program Memory
- 5.1 Table Instructions and Flash Programming
- 5.2 RTSP Operation
- 5.3 Enhanced In-Circuit Serial Programming
- 5.4 Control Registers
- 5.5 Programming Operations
- Register 5-1: NVMCON: Flash Memory Control Register
- 5.5.1 Programming Algorithm for Flash Program Memory
- EXAMPLE 5-1: Erasing a Program Memory Row – Assembly Language Code
- EXAMPLE 5-2: Erasing a Program Memory Row – ‘C’ Language Code
- EXAMPLE 5-3: Loading the Write Buffers – Assembly Language Code
- EXAMPLE 5-4: Loading the Write Buffers – ‘C’ Language Code
- EXAMPLE 5-5: Initiating a Programming Sequence – Assembly Language Code
- EXAMPLE 5-6: Initiating a Programming Sequence – ‘C’ Language Code
- 6.0 Data EEPROM Memory
- 7.0 Resets
- 8.0 Interrupt Controller
- 8.1 Interrupt Vector Table (IVT)
- 8.2 Reset Sequence
- 8.3 Interrupt Control and Status Registers
- Register 8-1: SR: ALU STATUS Register
- Register 8-2: CORCON: CPU Control Register
- Register 8-3: INTCON1: Interrupt Control Register 1
- Register 8-4: INTCON2: Interrupt Control Register2
- Register 8-5: IFS0: Interrupt Flag Status Register 0
- Register 8-6: IFS1: Interrupt Flag Status Register 1
- Register 8-7: IFS2: Interrupt Flag Status Register 2
- Register 8-8: IFS3: Interrupt Flag Status Register 3
- Register 8-9: IFS4: Interrupt Flag Status Register 4
- Register 8-10: IFS5: Interrupt Flag Status Register 5
- Register 8-11: IEC0: Interrupt Enable Control Register 0
- Register 8-12: IEC1: Interrupt Enable Control Register 1
- Register 8-13: IEC2: Interrupt Enable Control Register 2
- Register 8-14: IEC3: Interrupt Enable Control Register 3
- Register 8-15: IEC4: Interrupt Enable Control Register 4
- Register 8-16: IEC5: Interrupt Enable Control Register 5
- Register 8-17: IPC0: Interrupt Priority Control Register 0
- Register 8-18: IPC1: Interrupt Priority Control Register 1
- Register 8-19: IPC2: Interrupt Priority Control Register 2
- Register 8-20: IPC3: Interrupt Priority Control Register 3
- Register 8-21: IPC4: Interrupt Priority Control Register 4
- Register 8-22: IPC5: Interrupt Priority Control Register 5
- Register 8-23: IPC6: Interrupt Priority Control Register 6
- Register 8-24: IPC7: Interrupt Priority Control Register 7
- Register 8-25: IPC8: Interrupt Priority Control Register 8
- Register 8-26: IPC9: Interrupt Priority Control Register 9
- Register 8-27: IPC12: Interrupt Priority Control Register 12
- Register 8-28: IPC15: Interrupt Priority Control Register 15
- Register 8-29: IPC16: Interrupt Priority Control Register 16
- Register 8-30: IPC18: Interrupt Priority Control Register 18
- Register 8-31: IPC19: Interrupt Priority Control Register 19
- Register 8-32: IPC20: Interrupt Priority Control Register 20
- Register 8-33: INTTREG: Interrupt Control and Status Register
- 8.4 Interrupt Setup Procedures
- 9.0 Oscillator Configuration
- 10.0 Power-Saving Features
- 11.0 I/O Ports
- 12.0 Timer1
- 13.0 Timer2/3 and Timer4/5
- FIGURE 13-1: Timer2/3 and Timer4/5 (32-Bit) Block Diagram
- FIGURE 13-2: Timer2 and Timer4 (16-Bit Synchronous) Block Diagram
- FIGURE 13-3: Timer3 and Timer5 (16-Bit Asynchronous) Block Diagram
- Register 13-1: TxCON: Timer2 and Timer4 Control Register
- Register 13-2: TyCON: Timer3 and Timer5 Control Register
- 14.0 Input Capture with Dedicated Timers
- 15.0 Output Compare with Dedicated Timers
- 16.0 Serial Peripheral Interface (SPI)
- FIGURE 16-1: SPI1 Module Block Diagram (Standard Buffer Mode)
- FIGURE 16-2: SPI1 Module Block Diagram (Enhanced Buffer Mode)
- Register 16-1: SPIxSTAT: SPIx Status and Control Register
- Register 16-2: SPIxCON1: SPIx Control Register 1
- Register 16-3: SPIxCON2: SPIx Control Register 2
- EQUATION 16-1: Relationship Between Device and SPIx Clock Speed(1)
- TABLE 16-1: Sample SCKx Frequencies(1,2)
- 17.0 Inter-Integrated Circuit (I2C)
- 18.0 Universal Asynchronous Receiver Transmitter (UART)
- 19.0 Real-Time Clock and Calendar (RTCC)
- 20.0 32-Bit Programmable Cyclic Redundancy Check (CRC) Generator
- 21.0 High/Low-Voltage Detect (HLVD)
- 22.0 12-Bit A/D Converter with Threshold Detect
- FIGURE 22-1: 12-Bit A/D Converter Block Diagram
- 22.1 A/D Control Registers
- 22.1.1 Control Registers
- 22.1.2 A/D Result Buffers
- Register 22-1: AD1CON1: A/D Control Register 1
- Register 22-2: AD1CON2: A/D Control Register 2
- Register 22-3: AD1CON3: A/D Control Register 3
- Register 22-4: AD1CON5: A/D Control Register 5
- Register 22-5: AD1CHS: A/D Sample Select Register
- Register 22-6: AD1CHITH: A/D Scan Compare Hit Register (High Word)(1)
- Register 22-7: AD1CHITL: A/D Scan Compare Hit Register (Low Word)(1)
- Register 22-8: AD1CSSH: A/D Input Scan Select Register (High Word)(1)
- Register 22-9: AD1CSSL: A/D Input Scan Select Register (Low Word)(1)
- Register 22-10: AD1CTMUENH: A/D CTMU Enable Register (High Word)(1)
- Register 22-11: AD1CTMUENL: A/D CTMU Enable Register (Low Word)(1)
- 22.2 A/D Sampling Requirements
- 22.3 Transfer Function
- 22.4 Buffer Data Formats
- FIGURE 22-4: A/D Output Data Formats (12-Bit)
- TABLE 22-1: Numerical Equivalents of Various Result Codes: 12-Bit Integer Formats
- TABLE 22-2: Numerical Equivalents of Various Result Codes: 12-Bit Fractional Formats
- FIGURE 22-5: A/D Output Data Formats (10-Bit)
- TABLE 22-3: Numerical Equivalents of Various Result Codes: 10-Bit Integer Formats
- TABLE 22-4: Numerical Equivalents of Various Result Codes: 10-Bit Fractional Formats
- 23.0 Comparator Module
- 24.0 Comparator Voltage Reference
- 25.0 Charge Time Measurement Unit (CTMU)
- 26.0 Special Features
- 26.1 Configuration Bits
- TABLE 26-1: Configuration Registers Locations
- Register 26-1: FBS: Boot Segment Configuration Register
- Register 26-2: FGS: General Segment Configuration Register
- Register 26-3: FOSCSEL: Oscillator Selection Configuration Register
- Register 26-4: FOSC: Oscillator Configuration Register
- Register 26-5: FWDT: Watchdog Timer Configuration Register
- Register 26-6: FPOR: Reset Configuration Register
- Register 26-7: FICD: In-Circuit Debugger Configuration Register
- Register 26-8: FDS: Deep Sleep Configuration Register
- Register 26-9: DEVID: Device ID Register
- Register 26-10: DEVREV: Device Revision Register
- 26.2 On-Chip Voltage Regulator
- 26.3 Watchdog Timer (WDT)
- 26.4 Deep Sleep Watchdog Timer (DSWDT)
- 26.5 Program Verification and Code Protection
- 26.6 In-Circuit Serial Programming
- 26.7 In-Circuit Debugger
- 26.1 Configuration Bits
- 27.0 Development Support
- 27.1 MPLAB X Integrated Development Environment Software
- 27.2 MPLAB XC Compilers
- 27.3 MPASM Assembler
- 27.4 MPLINK Object Linker/ MPLIB Object Librarian
- 27.5 MPLAB Assembler, Linker and Librarian for Various Device Families
- 27.6 MPLAB X SIM Software Simulator
- 27.7 MPLAB REAL ICE In-Circuit Emulator System
- 27.8 MPLAB ICD 3 In-Circuit Debugger System
- 27.9 PICkit 3 In-Circuit Debugger/ Programmer
- 27.10 MPLAB PM3 Device Programmer
- 27.11 Demonstration/Development Boards, Evaluation Kits and Starter Kits
- 27.12 Third-Party Development Tools
- 28.0 Instruction Set Summary
- 29.0 Electrical Characteristics
- Absolute Maximum Ratings(†)
- 29.1 DC Characteristics
- FIGURE 29-1: PIC24FV32KA304 Voltage-Frequency Graph (Industrial and Extended)
- FIGURE 29-2: PIC24F32KA304 Family Voltage-Frequency Graph (Industrial and Extended)
- TABLE 29-1: Thermal Operating Conditions
- TABLE 29-2: Thermal Packaging Characteristics
- TABLE 29-3: DC Characteristics: Temperature and Voltage Specifications
- TABLE 29-4: High/Low–Voltage Detect Characteristics
- TABLE 29-5: BOR Trip Points
- TABLE 29-6: DC Characteristics: Operating Current (Idd)
- TABLE 29-7: DC Characteristics: Idle Current (Iidle)
- TABLE 29-8: DC Characteristics: Power-Down Current (Ipd)
- TABLE 29-9: DC Characteristics: I/O Pin Input Specifications
- TABLE 29-10: DC Characteristics: I/O Pin Output Specifications
- TABLE 29-11: DC Characteristics: Program Memory
- TABLE 29-12: DC Characteristics: Data EEPROM Memory
- TABLE 29-13: DC Characteristics: Comparator Specifications
- TABLE 29-14: DC Characteristics: Comparator Voltage Reference Specifications
- TABLE 29-15: Internal Voltage Regulator Specifications
- TABLE 29-16: CTMU Current Source Specifications
- 29.2 AC Characteristics and Timing Parameters
- TABLE 29-17: Temperature and Voltage Specifications – AC
- FIGURE 29-3: Load Conditions for Device Timing Specifications
- TABLE 29-18: Capacitive Loading Requirements on Output Pins
- FIGURE 29-4: External Clock Timing
- TABLE 29-19: External Clock Timing Requirements
- TABLE 29-20: PLL Clock Timing Specifications
- TABLE 29-21: AC Characteristics: Internal RC Accuracy
- TABLE 29-22: Internal RC Oscillator Specifications
- FIGURE 29-5: CLKO and I/O Timing Characteristics
- TABLE 29-23: CLKO and I/O Timing Requirements
- TABLE 29-24: Comparator Timings
- TABLE 29-25: Comparator Voltage Reference Settling Time Specifications
- FIGURE 29-6: Reset, Watchdog Timer, Oscillator Start-up Timer and Power-up Timer Timing Characteristics
- FIGURE 29-7: Brown-out Reset Characteristics
- TABLE 29-26: Reset, Watchdog Timer, Oscillator Start-up Timer, Power-Up Timer, and Brown-Out Reset Timing Requirements
- FIGURE 29-8: Timer1/2/3/4/5 External Clock Input Timing
- TABLE 29-27: Timer1/2/3/4/5 External Clock Input Requirements
- FIGURE 29-9: Input Capture x Timings
- TABLE 29-28: Input Capture x Requirements
- FIGURE 29-10: Output Compare x Timings
- TABLE 29-29: Output Capture Requirements
- FIGURE 29-11: PWM Module Timing Requirements
- TABLE 29-30: PWM Timing Requirements
- FIGURE 29-12: I2C Bus Start/Stop Bits Timing Characteristics (Master Mode)
- TABLE 29-31: I2C Bus Start/Stop Bit Timing Requirements (Master Mode)
- FIGURE 29-13: I2C Bus Data Timing Characteristics (Master Mode)
- TABLE 29-32: I2C Bus Data Timing Requirements (Master Mode)
- FIGURE 29-14: I2C Bus Data Timing Characteristics (Slave Mode)
- TABLE 29-33: I2C Bus Data Timing Requirements (Slave Mode)
- FIGURE 29-15: I2C Bus Start/Stop Bits Timing Characteristics (Slave Mode)
- TABLE 29-34: I2C Bus Start/Stop Bits Timing Requirements (Slave Mode)
- FIGURE 29-16: UARTx Baud Rate Generator Output Timing
- FIGURE 29-17: UARTx Start Bit Edge Detection
- TABLE 29-35: UARTx Timing Requirements
- FIGURE 29-18: SPIx Module Master Mode Timing Characteristics (CKE = 0)
- TABLE 29-36: SPIx Master Mode Timing Requirements (CKE = 0)
- FIGURE 29-19: SPIx Module Master Mode Timing Characteristics (CKE = 1)
- TABLE 29-37: SPIx Module Master Mode Timing Requirements (CKE = 1)
- FIGURE 29-20: SPIx Module Slave Mode Timing Characteristics (CKE = 0)
- TABLE 29-38: SPIx Module Slave Mode Timing Requirements (CKE = 0)
- FIGURE 29-21: SPIx Module Slave Mode Timing Characteristics (CKE = 1)
- TABLE 29-39: SPIx Module Slave Mode Timing Requirements (CKE = 1)
- TABLE 29-40: A/D Module Specifications
- FIGURE 29-22: A/D Conversion Timing
- TABLE 29-41: A/D Conversion Timing Requirements(1)
- 30.0 DC and AC Characteristics Graphs and Tables
- 30.1 Characteristics for Industrial Temperature Devices (-40°C to +85°C)
- FIGURE 30-1: Typical and Maximum Idd vs. Fosc (EC Mode, 2 MHz to 32 MHz, -40°C to +85°C)
- FIGURE 30-2: Typical and Maximum Idd vs. Fosc (EC Mode, 1.95 kHz to 1 MHz, +25°C)
- FIGURE 30-3: Typical and Maximum Iidle vs. Frequency (EC Mode, 2 MHz to 32 MHz)
- FIGURE 30-4: Typical and Maximum Iidle vs. Frequency (EC Mode, 1.95 kHz to 1 MHz)
- FIGURE 30-5: Typical Idd vs. Vdd (8 MHz, EC Mode)
- FIGURE 30-6: Typical Idd vs. Vdd (FRC Mode)
- FIGURE 30-7: Typical and Maximum Idd vs. Temperature (FRC Mode)
- FIGURE 30-8: Typical and Maximum Iidle vs. Vdd (FRC Mode)
- FIGURE 30-9: Typical and Maximum Iidle vs. Temperature (FRC Mode)
- FIGURE 30-10: FRC Frequency Accuracy vs. Vdd
- FIGURE 30-11: FRC Frequency Accuracy vs. Temperature (2.0V £ Vdd £ 5.5V)
- FIGURE 30-12: LPRC Frequency Accuracy vs. Vdd
- FIGURE 30-13: LPRC Frequency Accuracy vs. Temperature (2.0V £ Vdd £ 5.5V)
- FIGURE 30-14: Typical and Maximum Ipd vs. Vdd
- FIGURE 30-15: Typical and Maximum Ipd vs. Temperature
- FIGURE 30-16: Typical and Maximum Ipd vs. Vdd (Deep Sleep Mode)
- FIGURE 30-17: Typical and Maximum Ipd vs. Temperature (Deep Sleep Mode)
- FIGURE 30-18: Typical DIbor vs. Vdd
- FIGURE 30-19: Typical DIwdt vs. Vdd
- FIGURE 30-20: Typical DIdsbor vs. Vdd
- FIGURE 30-21: Typical DIhlvd vs. Vdd
- FIGURE 30-22: Typical DIdswdt vs. Vdd
- FIGURE 30-23: Typical Vbor vs. Temperature (BOR Trip Point 3)
- FIGURE 30-24: Typical Voh vs. Ioh (General Purpose I/O, as a Function of Vdd)
- FIGURE 30-25: Typical Voh vs. Ioh (General Purpose I/O, as a Function of Temperature, 2.0V £ Vdd £ 5.5V)
- FIGURE 30-26: Typical Vol vs. Iol (General Purpose I/O, as a Function of Vdd)
- FIGURE 30-27: Typical Vol vs. Iol (General Purpose I/O, as a Function of Temperature, 2.0V £ Vdd £ 5.5V)
- FIGURE 30-28: Vil/Vih vs. Vdd (General Purpose I/O, Temperatures as Noted)
- FIGURE 30-29: Vil/Vih vs. Vdd (I2C, Temperatures as Noted)
- FIGURE 30-30: Vil/Vih vs. Vdd (OSCO, Temperatures as Noted)
- FIGURE 30-31: Vil/Vih vs. Vdd (MCLR, Temperatures as Noted)
- FIGURE 30-32: Typical Band Gap Voltage vs. Vdd
- FIGURE 30-33: Typical Band Gap Voltage vs. Temperature (2.0V £ Vdd £ 5.5V)
- FIGURE 30-34: Typical Voltage Regulator Output vs. Vdd
- FIGURE 30-35: Typical Voltage Regulator Output vs. Temperature
- FIGURE 30-36: HLVD Trip Point Voltage vs. Temperature (HLVDL<3:0> = 0000, PIC24F32KA304 Family Devices ONLY
- FIGURE 30-37: Temperature Sensor Diode Voltage vs. Temperature (2.0V £ Vdd £ 5.5V)
- FIGURE 30-38: CTMU Output Current vs. Temperature (IRNG<1:0> = 01, 2.0V £ Vdd £ 5.5V)
- FIGURE 30-39: CTMU Output Current vs. Vdd (IRNG<1:0> = 01)
- 30.2 Characteristics for Extended Temperature Devices (-40°C to +125°C)
- FIGURE 30-40: Typical and Maximum Iidle vs. Vdd (FRC Mode)
- FIGURE 30-41: Typical and Maximum Iidle vs. Temperature (FRC Mode)
- FIGURE 30-42: Typical and Maximum Ipd vs. Vdd
- FIGURE 30-43: Typical and Maximum Ipd vs. Temperature
- FIGURE 30-44: Typical and Maximum Ipd vs. Vdd (Deep Sleep Mode)
- FIGURE 30-45: Typical and Maximum Ipd vs. Temperature (Deep Sleep Mode)
- FIGURE 30-46: Typical DIwdt vs. Vdd
- FIGURE 30-47: Typical DIdsbor vs. Vdd
- FIGURE 30-48: Typical DIhlvd vs. Vdd
- FIGURE 30-49: Typical Vol vs. Iol (General I/O, 2.0V £ Vdd £ 5.5V)
- FIGURE 30-50: Typical Voh vs. Ioh (General I/O, as a Function of Temperature, 2.0V £ Vdd £ 5.5V)
- FIGURE 30-51: Vil/Vih vs. Vdd (General Purpose I/O, Temperatures as Noted)
- FIGURE 30-52: Vil/Vih vs. Vdd (I2C, Temperatures as Noted)
- FIGURE 30-53: Vil/Vih vs. Vdd (OSCO, Temperatures as Noted)
- FIGURE 30-54: Vil/Vih vs. Vdd (MCLR, Temperatures as Noted)
- FIGURE 30-55: Typical Band Gap Voltage vs. Temperature (2.0V £ Vdd £ 5.5V)
- FIGURE 30-56: Typical Voltage Regulator Output vs. Temperature
- 30.1 Characteristics for Industrial Temperature Devices (-40°C to +85°C)
- 31.0 Packaging Information
- Appendix A: Revision History
- INDEX
- The Microchip Web Site
- Customer Change Notification Service
- Customer Support
- Product Identification System
- Worldwide Sales and Service
PIC24FV32KA304 FAMILY
DS30009995E-page 358 2011-2017 Microchip Technology Inc.
Registers
AD1CHITH (A/D Scan Compare Hit,
High Word) ....................................................... 217
AD1CHITH (A/D Scan Compare Hit,
Low Word) ........................................................217
AD1CHS (A/D Sample Select) ................................. 216
AD1CON1 (A/D Control 1) .......................................211
AD1CON2 (A/D Control 2) .......................................212
AD1CON3 (A/D Control 3) .......................................214
AD1CON5 (A/D Control 5) .......................................215
AD1CSSH (A/D Input Scan Select, High Word) ...... 218
AD1CSSL (A/D Input Scan Select, Low Word) ........ 218
AD1CTMUENH (A/D CTMU Enable,
High Word) ....................................................... 219
AD1CTMUENL (A/D CTMU Enable,
Low Word) ........................................................219
ALCFGRPT (Alarm Configuration) ........................... 190
ALMINSEC (Alarm Minutes and
Seconds Value) ................................................ 194
ALMTHDY (Alarm Month and Day Value) ............... 193
ALWDHR (Alarm Weekday and Hours Value) ......... 193
ANSA (Analog Selection, PORTA) .......................... 136
ANSB (Analog Selection, PORTB) .......................... 137
ANSC (Analog Selection, PORTC) .......................... 137
CLKDIV (Clock Divider) ...........................................119
CMSTAT (Comparator x Status) .............................. 228
CMxCON (Comparator x Control) ............................227
CORCON (CPU Control) ........................................... 33
CORCON (CPU Core Control) ................................... 80
CRCCON1 (CRC Control 1) .................................... 202
CRCCON2 (CRC Control 2) .................................... 203
CRCXORH (CRC XOR Polynomial, High Byte) ....... 204
CRCXORL (CRC XOR Polynomial, Low Byte) ........ 204
CTMUCON1 (CTMU Control 1) ...............................234
CTMUCON2 (CTMU Control 2) ...............................235
CTMUICON (CTMU Current Control) ...................... 237
CVRCON (Comparator Voltage
Reference Control) ...........................................230
DEVID (Device ID) ...................................................246
DEVREV (Device Revision) .....................................247
DSCON (Deep Sleep Control) ................................. 129
DSWAKE (Deep Sleep Wake-up Source) ............... 130
FBS (Boot Segment Configuration) ......................... 239
FDS (Deep Sleep Configuration) ............................. 245
FGS (General Segment Configuration) .................... 240
FICD (In-Circuit Debugger Configuration) ................ 244
FOSC (Oscillator Configuration) ..............................241
FOSCSEL (Oscillator Selection Configuration) ........ 240
FPOR (Reset Configuration) ....................................243
FWDT (Watchdog Timer Configuration) .................. 242
HLVDCON (High/Low-Voltage Detect Control) ........ 206
I2CxCON (I2Cx Control) .......................................... 172
I2CxMSK (I2Cx Slave Mode Address Mask) ........... 176
I2CxSTAT (I2Cx Status) ..........................................174
ICxCON1 (Input Capture x Control 1) ...................... 149
ICxCON2 (Input Capture x Control 2) ...................... 150
IEC0 (Interrupt Enable Control 0) ..............................90
IEC1 (Interrupt Enable Control 1) ..............................92
IEC2 (Interrupt Enable Control 2) ..............................93
IEC3 (Interrupt Enable Control 3) ..............................94
IEC4 (Interrupt Enable Control 4) ..............................95
IEC5 (Interrupt Enable Control 5) ..............................96
IFS0 (Interrupt Flag Status 0) .................................... 83
IFS1 (Interrupt Flag Status 1) .................................... 85
IFS2 (Interrupt Flag Status 2) .................................... 86
IFS3 (Interrupt Flag Status 3) .................................... 87
IFS4 (Interrupt Flag Status 4) .................................... 88
IFS5 (Interrupt Flag Status 5) .................................... 89
INTCON1 (Interrupt Control 1) ................................... 81
INTCON2 (Interrupt Control 2) ................................... 82
INTTREG (Interrupt Control and Status) ................. 112
IPC0 (Interrupt Priority Control 0) .............................. 97
IPC1 (Interrupt Priority Control 1) .............................. 98
IPC12 (Interrupt Priority Control 12) ........................ 107
IPC15 (Interrupt Priority Control 15) ........................ 108
IPC16 (Interrupt Priority Control 16) ........................ 109
IPC18 (Interrupt Priority Control 18) ........................ 110
IPC19 (Interrupt Priority Control 19) ........................ 110
IPC2 (Interrupt Priority Control 2) .............................. 99
IPC20 (Interrupt Priority Control 20) ........................ 111
IPC3 (Interrupt Priority Control 3) ............................ 100
IPC4 (Interrupt Priority Control 4) ............................ 101
IPC5 (Interrupt Priority Control 5) ............................ 102
IPC6 (Interrupt Priority Control 6) ............................ 103
IPC7 (Interrupt Priority Control 7) ............................ 104
IPC8 (Interrupt Priority Control 8) ............................ 105
IPC9 (Interrupt Priority Control 9) ............................ 106
MINSEC (RTCC Minutes and Seconds Value) ........ 192
MTHDY (RTCC Month and Day Value) ................... 191
NVMCON (Nonvolatile Memory Control) ................... 64
NVMCON (NVM Flash Memory Control) ................... 59
OCxCON1 (Output Compare x Control 1) ............... 157
OCxCON2 (Output Compare x Control 2) ............... 159
OSCCON (Oscillator Control) .................................. 117
OSCTUN (FRC Oscillator Tune) .............................. 120
PADCFG1 (Pad Configuration Control) ................... 176
RCFGCAL (RTCC Calibration
and Configuration) ........................................... 187
RCON (Reset Control) ............................................... 70
REFOCON (Reference Oscillator Control) .............. 123
RTCCSWT (RTCC Control/
Sample Window Timer) ................................... 195
RTCPWC (RTCC Configuration 2) .......................... 189
SPIxCON1 (SPIx Control 1) ..................................... 166
SPIxCON2 (SPIx Control 2) ..................................... 167
SPIxSTAT (SPIx Status and Control) ...................... 164
SR (ALU STATUS) .............................................. 32, 79
T1CON (Timer1 Control) ......................................... 140
TxCON (Timer2/4 Control) ....................................... 144
TyCON (Timer3/5 Control) ....................................... 145
ULPWCON (ULPWU Control) ................................. 132
UxMODE (UARTx Mode) ......................................... 180
UxRXREG (UARTx Receive) ................................... 184
UxSTA (UARTx Status and Control) ........................ 182
UxTXREG (UARTx Transmit) .................................. 184
WKDYHR (RTCC Weekday and Hours Value) ........ 192
YEAR (RTCC Year Value) ....................................... 191
Resets
Brown-out Reset (BOR) ............................................. 73
Clock Source Selection .............................................. 72
Deep Sleep BOR (DSBOR) ....................................... 73
Device Times ............................................................. 72
RCON Flag Operation ............................................... 71
SFR States ................................................................ 73
Revision History ............................................................... 353