Datasheet

PIC24FV32KA304 FAMILY
DS30009995E-page 278  2011-2017 Microchip Technology Inc.
TABLE 29-20: PLL CLOCK TIMING SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Sym Characteristic
(1)
Min Typ
(2)
Max Units Conditions
OS50 F PLLI PLL Input Frequency
Range
4 — 8 MHz ECPLL, HSPLL modes,
-40°C  T
A  +85°C
OS51 F SYS PLL Output Frequency
Range
16 — 32 MHz -40°C  T A  +85°C
OS52 T
LOCK PLL Start-up Time
(Lock Time)
—1 2ms
OS53 D
CLK CLKO Stability (Jitter) -2 1 2 % Measured over a 100 ms
period
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
TABLE 29-21: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min Typ Max Units Conditions
F20 Internal FRC Accuracy @ 8 MHz
(1)
FRC -2 — +2 % +25°C 3.0V  V DD  3.6V, F device
3.2V  V
DD  5.5V, FV device
-6 — +6 % -40°C  T A +85°C 1.8V  V DD  3.6V, F device
2.0V  V
DD  5.5V, FV device
LPRC @ 31 kHz
(2)
F21 -15 — 15 %
Note 1: Frequency is calibrated at +25°C and 3.3V. The OSCTUN bits can be used to compensate for temperature
drift.
2: The change of LPRC frequency as V DD changes.
TABLE 29-22: INTERNAL RC OSCILLATOR SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Sym Characteristic
(1)
Min Typ Max Units Conditions
T FRC FRC Start-up Time — 5 — s
T LPRC LPRC Start-up Time — 70 — s
Note 1: These parameters are characterized but not tested in manufacturing.