Datasheet

 2011-2017 Microchip Technology Inc. DS30009995E-page 269
PIC24FV32KA304 FAMILY
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (I PD )
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Device Typical
(1)
Max Units Conditions
Power-Down Current (I
PD )
DC60 PIC24FV32KA3XX
6.0
—
µA
-40°C
2.0V
Sleep Mode
(2)
8.0 +25°C
8.5 +60°C
9.0 +85°C
— 15 +125°C
6.0
—
µA
-40°C
5.0V
8.0 +25°C
9.0 +60°C
10.0 +85°C
— 15 +125°C
PIC24F32KA3XX
0.025
—
µA
-40°C
1.8V
0.80 +25°C
1.5 +60°C
2.0 +85°C
— 7.5 +125°C
0.040
—
µA
-40°C
3.3V
1.0 +25°C
2.0 +60°C
3.0 +85°C
— 7.5 +125°C
DC61 PIC24FV32KA3XX 0.25 — µA -40°C 2.0V
Low-Voltage
Sleep Mode
(2)
0.35 3.0 µA +85°C 5.0V
— 7.5 µA +125°C 5.0V
DC70 PIC24FV32KA3XX 0.03 — µA -40°C 2.0V
Deep Sleep Mode
0.10 2.0 µA +85°C 5.0V
— 6.0 µA +125°C 5.0V
PIC24F32KA3XX 0.02 — µA -40°C 1.8V
0.08 1.2 µA +85°C 3.3V
— 1.2 µA +125°C 3.3V
Legend: Unshaded rows represent PIC24F32KA3XX devices and shaded rows represent PIC24FV32KA3XX
devices.
Note 1: Data in the Typical column is at 3.3V, +25°C (PIC24F32KA3XX) or 5.0V, +25°C (PIC24FV32KA3XX)
unless otherwise stated. Parameters are for design guidance only and are not tested.
2: Base I PD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set
low, PMSLP is set to ‘0’ and WDT, etc., are all switched off.
3: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
4: This current applies to Sleep only.
5: This current applies to Sleep and Deep Sleep.
6: This current applies to Deep Sleep only.