Datasheet

Table Of Contents
PIC24FV32KA304 FAMILY
DS30009995E-page 228 2011-2017 Microchip Technology Inc.
bit 4
CREF:
Comparator x Reference Select bits (non-inverting input)
1 = Non-inverting input connects to the internal CV
REF
voltage
0 = Non-inverting input connects to the CxINA pin
bit 3-2
Unimplemented:
Read as0
bit 1-0
CCH<1:0>:
Comparator x Channel Select bits
11 = Inverting input of the comparator connects to V
BG
10 = Inverting input of the comparator connects to the CxIND pin
01 = Inverting input of the comparator connects to the CxINC pin
00 = Inverting input of the comparator connects to the CxINB pin
REGISTER 23-1: CMxCON: COMPARATOR x CONTROL REGISTERS (CONTINUED)
REGISTER 23-2: CMSTAT: COMPARATOR x MODULE STATUS REGISTER
R/W-0 U-0 U-0 U-0 U-0 R-0, HSC R-0, HSC R-0, HSC
CMIDL
C3EVT C2EVT C1EVT
bit 15 bit 8
U-0 U-0 U-0 U-0 U-0 R-0, HSC R-0, HSC R-0, HSC
C3OUT C2OUT C1OUT
bit 7 bit 0
Legend:
HSC = Hardware Settable/Clearable bit
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0
-n = Value at POR 1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15
CMIDL:
Comparator x Stop in Idle Mode bit
1 = Comparator interrupts are disabled in Idle mode; enabled comparators remain operational
0 = Continues operation of all enabled comparators in Idle mode
bit 14-11
Unimplemented:
Read as0
bit 10
C3EVT:
Comparator 3 Event Status bit (read-only)
Shows the current event status of Comparator 3 (CM3CON<9>).
bit 9
C2EVT:
Comparator 2 Event Status bit (read-only)
Shows the current event status of Comparator 2 (CM2CON<9>).
bit 8
C1EVT:
Comparator 1 Event Status bit (read-only)
Shows the current event status of Comparator 1 (CM1CON<9>).
bit 7-3
Unimplemented:
Read as0
bit 2
C3OUT:
Comparator 3 Output Status bit (read-only)
Shows the current output of Comparator 3 (CM3CON<8>).
bit 1
C2OUT:
Comparator 2 Output Status bit (read-only)
Shows the current output of Comparator 2 (CM2CON<8>).
bit 0
C1OUT:
Comparator 1 Output Status bit (read-only)
Shows the current output of Comparator 1 (CM1CON<8>).