Datasheet

PIC24FV32KA304 FAMILY
DS39995B-page 272  2011 Microchip Technology Inc.
Power-Down Current (IPD) (Continued)
DC70
PIC24FV32KA3XX
0.03
—
µA
-40°C
2.0V
Deep Sleep Mode
DC70a — +25°C
DC70b — +60°C
DC70c — +85°C
DC70d
0.10
—
µA
-40°C
5.0V
DC70e — +25°C
DC70f — +60°C
DC70g 1.20 +85°C
DC70h
PIC24F32KA3XX
0.02
–
µA
-40°C
1.8V
DC70i — +25°C
DC70j — +60°C
DC70k — +85°C
DC70l
0.08
—
µA
-40°C
3.3V
DC70m — +25°C
DC70n — +60°C
DC70o 1.20 +85°C
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V PIC24F32KA3XX
2.0V to 5.5V PIC24FV32KA3XX
Operating temperature -40°C  T
A  +85°C for Industrial
Parameter
No.
Device Typical
(1)
Max Units Conditions
Legend: Unshaded rows are PIC24F32KA3XX devices, and shaded rows are PIC24FV32KA3XX devices.
Note 1: Data in the Typical column is at 3.3V, 25°C (PIC24F32KA3XX); 5.0V, 25°C (PIC24FV32KA3XX) unless
otherwise stated. Parameters are for design guidance only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set
low, PMSLP is set to ‘0’, and WDT, etc., are all switched off.
3: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
4: Current applies to Sleep only.
5: Current applies to Sleep and Deep Sleep.
6: Current applies to Deep Sleep only.